• info@veepeeengineers.com
  • +91 91251 42400

WHY CHOOSE US

SERVICES

Marine Couplings

The Marine design allows angular movement, which caters for minor misalignment and pipe deflection with couplings up to 6º & flange adaptors to 3º. Marine couplings are capable of accommodating 10mm of expansion/contraction per fitting, flange adaptors 5mm which reduces the need for supplementary expansion joints or bellows. Marine products up to DN300 are pre-assembled allowing quick and efficient installation, without the need for dismantling, even in the most difficult of conditions.

Marine Adaptors

The Marine design allows angular movement, which caters for minor misalignment and pipe deflection with couplings up to 6º & flange adaptors to 3º. Marine products up to DN300 are pre-assembled allowing quick and efficient installation, without the need for dismantling, even in the most difficult of conditions. Marine couplings are capable of accommodating 10mm of expansion/contraction per fitting, flange adaptors 5mm which reduces the need for supplementary expansion joints or bellows.

FlexLock Coupling

FlexLock permits angular deflection between pipes, allowing for normal pipeline movement such as ground settlement. Long radius curves can also be accommodated, reducing the need for special fittings. FlexLock couplings Cost effective – FlexLock can provide significant cost savings compared to non-locking couplings with a harnessing system.couplings allow for a total angular deflection of ±6° (±3° for flange adaptors). Long radius curves can also be accommodated, r

FlexLock Adaptor

FlexLock permits angular deflection between pipes, allowing for normal pipeline movement such as ground settlement. Long radius curves can also be accommodated, reducing the need for special fittings. FlexLock couplings allow for a total angular deflection of ±6° (±3° for flange adaptors). Cost effective – FlexLock can provide significant cost savings compared to non-locking couplings with a harnessing system. Restrains pressure thrusts without thrust blocks at bends.

Dismantling Joints

The simplicity and versatility of the fittings make them suitable for many applications including pumping stations, water treatment works, sewage treatment works, plant rooms, meter chambers, power generation equipment, gas distribution station. Veepee Engineers Dismantling Joints are particularly suitable for simplifying the installation & removal of isolation valves, control valves, check valves,Designed and manufactured to BS EN ISO 9001: 2008 and tested to the most exacting requirements of WRAS

Wall Couplings

Straightforward for Civil Contractor to position the pipe. Easy to secure and prevent movement of the pipe work. Large formwork panels can be reused as there is no need to make holes in the shuttering. No need for a contractor to come back and cast in pipes or ‘make good’ the wall surface after casting pipes. Ensures good bond between wall and pipe. Installed cost can be drastically reduced particularly where a large number of through the wall joints appear on a structure e.g. in a gravity treatment works.

HandiClamp - Single / Double / Triple Band

HandiRange will seal corrosion holes, impact damage and longitudinal cracks Reduced stock holding due to wide tolerance in range Clamps are available with single, double and triple bands - as 1 part (up to 10mm tolerance), 2 parts (up to 20mm tolerance), 3 parts (up to 30mm tolerance) Permanent repair for many types of pipe damage from DN50 (2”) to DN1000 (24”)Reduced stock holding due to wide tolerance in range

HandiTap

HandiTap will seal corrosion holes, impact damage and longitudinal cracks Reduced stock holding due to wide tolerance in range Taps are available in single double and triple band options - as 1 part (up to 10mm tolerance), 2 parts (up to 20mm tolerance), 3 parts (up to 30mm tolerance) Various female BSP outlet options available No specialist equipment required,standard under-pressure equipment can be used with HandiTap No costly mains shutdown with HandiTap,

HandiBand

HandiBand will seal corrosion holes, impact damage and longitudinal cracks A high quality repair clamp designed for localised damage on small bore pipes Suitable for DN15 to DN50 (1/2" to 2") HandiBand will seal corrosion holes, impact damage and longitudinal cracks A high quality repair clamp designed for localised damage on small bore pipes Suitable for DN15 to DN50 (1/2" to 2")

HandiTee

HandiTee will seal corrosion holes, impact damage and longitudinal cracks HandiTee is lightweight & easy to install so it is ideal for making simple flanged connections on pressurised pipes No specialist equipment required, standard under-pressure equipment can be used with HandiTee No costly mains shutdown with HandiTee,Repair for many types of pipe damage from DN80 (3”) to DN250 (10”)

MaxiFit

Design life expectancy of 50 years, established by rigorous 'Accelerated Age Testing' which subjects product to working pressure at 80°C for 1000 hours. Wide tolerances permit lower stock holding Extensive range is available in sizes DN40 - DN300 All models accommodate angularity between pipes which allows for normal pipeline movement Couplings and reducing couplings allowing for

Zero Velocity Valve Manufacturer

Zero velocity valve are used in water pumping system to prevent from pressure surge or water hammer due to flow reversal. We manufacture Zero Velocity Valve as per customer specific requirement.Zero velocity valve are used in water pumping system to prevent from pressure surge or water hammer due to flow reversal. We manufacture Zero Velocity Valve as per customer specific requirement.Our product range includes

Style 1100, 1101, 1102, 1103 & 1104

Versatile hand-built construction Standard or custom face-to-face dimensions Wide flowing arch design Exceptional all directional movement capability Virtually eliminates sediment build-up Higher pressure rating than conventional expansion joints Excellent chemical and abrasion resistance Full vacuum rating (-1 Bar g) in all style 1101 sizes For multi-arch full vacuum applications refer to style 1200

Style 1092 & 1097

Round and rectangular designs in all styles Exceptional all directional movement capability Absorbs system noise, vibration and shock Compensates for minor misalignment and offset Integrally flanged design Low stiffness and deflection forces Simple to install, lightweight and high strength Provides easy access to ducting and equipment Carbon steel, stainless steel, or hot dipped galvanised backing rings available for easy bolting to mating flanges

Saw Pipe

We are leading supplier and manufacture of SAW Pipes, MS Pipes and Fabricated Pipes in Mumbai, Maharashtra and PAN India We have a ISI and ISO certification to manufacture pipes. We have a capability to manufacture pipes from 300mm daimeter to upto 4000mm daimeter. We have a well experienced and qualified team of supervisors, skilled workers who manufacture pipes as per exact specification and maintain a very high level of quality control.

PORTFOLIO

  • All
  • Products

EXPERIENCED TEAM

WHAT OUR CLIENTS SAY

150

Working Persons

1200

Projects Completed

800

Happy Clients

1200

Awards Achieved

PHOTO GALLERY

Dismantling Joint

Pipe Repair Clamp

Joint Leak Clamp

Collar Clamp

Metal Pipe Elbow

Pipe Coupling-Junior

Elbow 90 Degree

Pipe Tee

Ms Pipe Reducer

RECENT POSTS

OUR PARTNERS